Jinhua Kingwe Electrical Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. co Ro
  • Company Name : Jinhua Kingwe Electrical Co., Ltd.
  • Tel : 0086-579-82523382
  • Fax : 0086-579-82523382
  • Address : Zhejiang,JINHUA,No. 1600, West Wujiang Road,
  • Country/Region : China
  • Zip : 321018

Stainless Steel Hand Dryer

Stainless Steel Hand Dryer
Product Detailed
Related Categories:Hand Dryers
Dries hands in 10Seconds Energy(Cost) Saver ECO-Friendly product 3Times faster World's best hand dryer

Product Photo

 

TECHNICAL DATA SHEET:

Voltage: 220V/50Hz, 12A, 2750W

Air Temperature: 50°C

Air Velocity: 26M/S

Drying Time: 10 to 15 Seconds

Sensor Range: 5-15CM

Protection Level: IP23 

Electrical Isolation: CLASS 1

Finish: Bright, Satin, Textured Graphite,White, Red, Any Finish.

Dimension: W272×D164×H320MM 

Material: Stainless Steel 304

Motor: Brush Motor, 4500RPM 

WARNING This product is intended for installation by a qualified service person.Disconnect power at the service breaker before installing or serving.Failure to properly ground unit could result in severe electrical shock and/or death.All units must be supplied with a 3-wire service. The ground wire must be connected to the dryer’s backplate. NOTE Do not install dryer over washbasin.If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or similar qualified person in order to avoid a hazard. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules INSTALLATION1.Installation must be carried out in accordance with the current edition of the local wiring regulations code having  jurisdiction. Installation should be performed only by a qualified electrician.2.Place template against wall at desired height(see mounting height recommendations) and mark locations of 4 mounting holes Dia. 8mm(5/16").3.Remove and retain 2 side security hex cover screws and cover. Then mount the hand dryer base on the wall.4.Replace cover. Do not over-tighten screws.5.Connect the hand dryer plug to the power supply. Connect wire as follows if the dryer is ordered without plug:A.Connect the live wire to the terminal block marked “L”.B.Connect the neutral wire to the terminal block marked “N”.C.Connect the ground wire to the terminal block marked “E”. MOUNTING HEIGHT Men                                     1000mm       (40")Women                                960mm         (38")Children 4-7 years                 812mm         (32")Children 8-10 years               860mm         (34")Children 11-13 years             910mm         (36")Children 14-16 years             960mm         (38")Handicapped                         860mm         (34") OPERATION No-touch operation.Shake excess water from hands.Place hands under the outlet to start operation.Rub hands lightly and rapidly.Stops automatically after hands are removed. MAINTENANCE Periodic cleaning of the unit is recommended. Remove cover and clean dryer interior dust lint.Wipe the cover with a damp cloth and mild cleaning solution. Do not soak.Never use abrasives to clean the cover. Producing Reference 

Stainless Steel Hand Dryer



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.